Desktop Reflow Oven T-962A+
A total of 11 pages ,now :1 page prev | next playNextPic
Desktop Reflow Oven T-962A+
1 / 11

1. Features:


a. This oven solder leadfree paste very well.

b. This oven can connect with PC, easy to input/set/transmit/adjust/save/manage wave data.

c. Many kinds wave input style in control software, easy to set wave.

d. The control software is with graphical display, display the wave intuitively.

e. The control software is with wave printing function, easy to save/manage/analysis the wave data.

f. The control software is with 299 kinds of paste data inside.

g. Adopt stable and high-speed MCU and advanced intelligent temperature measurement technology, temperature in the oven is very stable,exact and even.

h. Add the compensation circuit, make the oven temperature keep stable from different environment.

i. This oven is with hot air fan inside, to make the temperature inside more even.

j. The temperature is room temp to 350C, suit for single/double side PCB board and lead/leadfree paste soldering.

k. Add special exhaust on the back, provide good operation environment.

l. Friendly human-machine operation interface, perfect LCD display, very easy to operate.

m. Good database management function.

n. Thermostatic timer function


2. Parameters

Soldering area                       450mmX370mm

Dimension                      520mmX440mmX220mm

N. Weight                              17.5kg

Voltage/Frequency                   AC220230V/50Hz

Power rating                         2300W

Cycle time                            216 min

Temp rage                        Room temp350


3. Configuration

Name                                                        Q’ty

T-962A+ lead-free reflow oven                  1

Power line                                                   1

fuse                                                             1

CD                                                               1

COM communication line                          1


4. Installation

i.        Please put this reflow oven on the flat tabletop.

ii.       Please put this reflow oven in safe environment, not flammable or combustible.

iii.      Please leave 20mm around the machine, for heat dissipation.

iv.      The machine must be connected with Earth wire.


5. Operation

1Enter the software interface

Press F1, will come to the independent operation interface

2Select the wave

Under the independent operation interface, press F2 to select wave, press F1 and F3 to select the wave you need, then press “return key” to independent operation interface.

3Run the wave

Under the independent operation interface, press F1, it will run the wave you selected.

4Thermostatic timer function

Under the independent operation interface, press F3, start the thermostatic timer function.

Thermostatic timer function means the machine can keep thermostatic temp if you set time, once time over, the machine stop heating.

Press F3 change “set temp”/”set time”, press F1/F2 to adjust the numerical value, the time is--:-- is untimed model, means the machine is keeping thermostatic heating, not stop automatically.

5Change language

Under the main interface, press F3 to change the language.


6. Attention

i.       If not use this machine for long time, please unplug the power line plug.

ii.      The machine should be connected to the exhaust passage within the outdoor ventilation or exhaust recovery, prevent solder paste volatiles poisoning.

iii.      This machine is with strict protective insulation materials, please don’t open the machine casually.


7. Warranty

The warranty for mainbody is one year, for parts is three months, provide lifetime technical guide.



If there is inconsistency between this user manual and the actual product, the actual product shall govern.